15 Split Rings Sterling Silver Charm Parts

Look For 15 Split Rings Sterling Silver Charm Parts at Amazon

Knowing the terminology of basic jewelry conclusions will aid the novice jewelry architect to make quality jewelry pieces faster. Split rings may look similar to jump rings, but they are not interchangeable.

What is a split ring?

A split ring is a round jewelry finding made of wire that does not have a gap through the ring, so jewelry constituents do not fall through a cut.. The wire curves over closely two whole circles — 720 degrees. At the basi circle, the wire makes a bend, then the second circle is right next to the first. If you have ever purchased a plain key ring and “wound” your keys onto the ring, then you have already used a split ring.

Uses of split rings

The description above gives an evident use for split rings — as key rings. The key rings themselves may be beautified with charms or pendants if their holes are big sufficient to fit directly onto the key rings; if their holes are not huge sufficient to fit directly onto the key ring, then introductory “wind” them onto a littler ring, then “wind” the little ring onto the big key ring. For putting charms on bracelets, choose rings with diameters littler than the beads on either side if you want the charms fixed in place. Lobster claw clasps and toggles may be attached to either bead wire projects or chain projects using little split rings.

Some humans will use split rings as the target for a lobster claw clasp on bead wire projects — crimping the ring into place at the end of the jewelry piece. However, the “transition” point from the two wires of the ring to the one wire may harm a stranded bead wire. The “transition” point does not matter rather as much when using a split ring with metal chain. The author alternatively chooses recommends closed (soldered) jump rings for lobster claw targets on crimped bead wire projects, either heavy gauge open jump rings or link locks to connect clasps and toggles to chain, and heavy gauge open jump rings or a closed jump ring/link lock combining for lobster claw targets on chain projects. Closed jump rings and link locks have a more “professional” for terminating bracelets, necklaces and anklets.

Split Ring Materials

Split rings will most often times be made of the following materials:

Platinum
Palladium
Gold: 18 karat, 14 karat, 12 karat in yellow gold, white gold, green gold, rose gold
Gold-Filled: base metal with karat gold mechanically and thermally bonded to visible and wear surfaces
Silver: sterling silver (.925 silver) including argentium silver and blackened silver
Titanium
Surgical Steel
Lead-free Brass, normally plated with gold, silver, copper, imitation rhodium, and gunmetal, optionally antiqued or oxidized

The temper of most sterling rings does not concede them to return to shape after having jewelry parts “wound” onto them. Plated and gold-filled split rings do not have as much problem “springing” back into shape. As long as a jewelry architect discloses using plated rings with sterling silver, numerous buyers will receive the use if the overall design attracts the eye. However, the Federal Trade Commission frowns on those who present or infer a piece as sterling silver when it uses lesser metals.

Wire diameter and overall diameter of a split ring will influence the effort necessitated to use them. Small rings with thick wire will be difficult to open. Large rings with little diameter wire may not be strong sufficient for the application. Many jewelry-makers will use split ring pliers to support in opening split rings; these pliers have a “hook” jaw bent toward a flat jaw that makes these pliers more safer and posing no difficulty to use than teeth or fingernails.

Basic jewelry-making parts include split rings which have commended uses and permissible uses. Experience making jewelry will aid instruct how and when a jewelry architect must use split rings for best effect and most eminent quality.

15 Sterling Silver Split Rings Great for Connecting Clasps, Charms, Links & Other Jewelry. This is a new set of 15 sterling silver split rings. Great for connecting clasps, charms, links and other jewelry. No soldering is necessary because they work like key chain rings. Each measures approximately 6 mm (1/4″) in diameter.

Most helpful customer reviews

1 of 1 people found the following review helpful.
Quality of product
By jlosco
The product was not sturdy enough for the purposes I ordered it for. …namely, attaching charms to a bracelet and feel secure. The response time and hopefully funds return from this company so far have been very good.